Lamella Clarifier
Price And Quantity
- 1
- Unit/Units
- 400000.00 INR
Product Specifications
- Suspended solid separation
- Mild steel with epoxy paint/ Stainless steel
- 1 to 10000 Ton/day
- FRP PLATE PACKS
- 1*1
- Effluent Treatment Plants
- PLATE PACK TECHNOLOGY
- AC
- Automatic
- 1 kgf/m2
- 4*1*3.5 Meter (m)
- 2800 Kilograms (kg)
- BLUE
- 12 MONTHS FROM THE DATE OF COMMISSIONING
Product Description
The Lamella clarifier is a device which can separate the solid in the water under gravity . Its working principle is based on the shallow water theory , sedimentation tank's sedimentation efficiency is only related with the sedimentation area . In the lamella sedimentation tank , the sedimentation area is the sum of the horizontal projection of all inclined plates , doubling increase sedimentation efficiency .
It is kind of high efficient combined type settling tank;set many dense inclined plate packing in sediment area, to make the suspended impurity in water sediment, water rise flow along inclined tube, the separated sludge down to the tank bottom along the inclined tube by gravity, then discharge it in concentration. Such tank can improve sediment efficiency 50~60%, it can improve treatment capacity 3~5 times in the same area. It can design different flow rate inclined plate sediment device according to raw waste water test report, it need dose flocculant usually.
Its widely suitable for the industrial waste , sanitary sewage , coal mine pit sewage , the non ferrous metal processing waste water . Power plant ,Boiler room water power dust removal waste water , Liquid Solid of coal gas station washing . Also suitable for the pretreatment of the water purify .
It is kind of high efficient combined type settling tank;set many dense inclined plate packing in sediment area, to make the suspended impurity in water sediment, water rise flow along inclined tube, the separated sludge down to the tank bottom along the inclined tube by gravity, then discharge it in concentration. Such tank can improve sediment efficiency 50~60%, it can improve treatment capacity 3~5 times in the same area. It can design different flow rate inclined plate sediment device according to raw waste water test report, it need dose flocculant usually.
Its widely suitable for the industrial waste , sanitary sewage , coal mine pit sewage , the non ferrous metal processing waste water . Power plant ,Boiler room water power dust removal waste water , Liquid Solid of coal gas station washing . Also suitable for the pretreatment of the water purify .
WORKING PROCESS-
- Waste water flow into flocculation tank after add coagulant aid
- Waste water flow into lamella clarifier by feed box
- Waste rise flow along inclined tube,suspended impurity in water settle down.
- The separated sludge down to the tank bottom along the inclined tube by gravity,then discharge by sludge hopper.
- The clean water rise flow along flow distribution orifices and concentrate in discharge flumes
- When the water is enough ,they will overflow ,then realize the separation of solid-liquid.
EQUIPMENT FEATURES :
- Capacity 1-150 m3/h
- Efficient treatment of high concentrations of solid waste water (grit , clay , lime , metal particles )
- The smallest floor area , maximum capacity
- Install both in indoors and outdoors ( but the ambient temperature needs above 0 )
- Slope sedimentation tank can create a good laminar flow environment , to achieve better precipitation effect
- Intensive design , minimize the hydraulic interference caused by wind or temperature change
- Suitable for on-site unattended automatic continuous operation
- Life time of carbon steel material >10 years ; life time of stainless steel material >20 years
- Supplied as a complete unit for easy installation
ADVANTAGES-
- Simple structure,without wearing parts,wear well,decrease maintenance
- Steady operation,easy operation
- Up to 10 m2 of settling area per square meter of ground area
- Small power,save energy
- Small occupy area, low investment, high efficient. Space requirement can be reduced by up to 90% when compared with a settlement tank
- Short retention time, high sediment efficiency, no sludge back flow.
- Supplied as a complete unit for easy installation
APPLICATIONS-
- Electroplate effluent contain many kinds of metal ion, Cr,Cu,Fe,Zn ,Ni etc remove rate all above 90%, after treatment, all can reach discharge standard.
- Coal mine,mineral processing waste water all can make the turbidity from 500-1500 mg/L reduce to 5 mg/L.
- Printing and dyeing,bleach and dye etc effluent chroma removing rate reach 70~90%,COD remove rate 50-70%.
- Tannery ,food etc industrial sewage COD remove rate 50~80%, impurity solids remove rate above 90%.
- Chemical waste water COD remove rate 60~70%, chrome removal rate 60~90%, suspended solids reach discharge standard.
Specification
Type (PCS) Capacity | 10 | 20 | 30 | 40 | 60 | 110 | 220 | 330 | 440 |
Plate Distance | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
Effective Plate Area | 15 | 29 | 43 | 58 | 86 | 157 | 314 | 472 | 15 |
A-Length mm | 2414 | 2414 | 2414 | 2414 | 2414 | 3514 | 3514 | 3514 | 3514 |
B-width mm | 1214 | 1714 | 2214 | 2714 | 3714 | 2214 | 4214 | 6214 | 8214 |
C-Height mm | 2490 | 2490 | 2490 | 2490 | 2490 | 3125 | 3125 | 3125 | 3125 |
Trade Information
- Letter of Credit (L/C)
- 1 Per Week
- 4-6 Week
- No
- 1. Special logistics packaging
- Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
- All India
Related Products
Contact Us
Unit 4, Embassy Square, No.148, Ground Floor, Infantry Road,, Bengaluru, Karnataka, 560001, India
Phone :09591974580